Industrial Manufacturing
Industrial user or commercial buyer?
Metal Treatment MT-10®
Metal Treatment MT-10® is an anti-friction lubricant additive used with the existing lubricant in engines, transmissions, gears, bearings, pumps, motors, and other mechanical equipment. MT-10® improves metal-surface lubricity and promotes protective boundary-film formation to reduce friction-related heat and wear.
Reduces friction-related heat and wear
Improves lubricity and load-carrying capacity
Lowers operating temperatures
Improves equipment operating efficiency
Hydraulic Treatment HT-10™
Hydraulic oil additive formulated to reduce friction-related heat and wear, improve metal-surface lubricity, and support reliable hydraulic system operation. Its lower viscosity makes Hydraulic Treatment HT-10™ especially well suited for systems with fine micron filtration or sensitive filter monitoring.
Reduces friction, heat and wear
Reduces varnish-related sticking and deposits
Supports smoother hydraulic system operation with less noise
Extends equipment service life and reduces valve replacement
Lowers system operating temperatures
Reduces energy costs
Power-Lift Grease PL-10™
Power-Lift Grease PL-10™ is a lithium complex, anti-wear, extreme-pressure (EP) grease formulated to reduce friction and wear in demanding applications. Fortified with Muscle Metal Treatment MT-10®, PL-10 combines excellent grease retention, thermal stability, and load-carrying performance with enhanced boundary lubrication protection.
Extreme-pressure and anti-wear protection
Protects against rust and corrosion
Improves equipment reliability
Continuous operating temperature range: 0°F to 450°F (-17°C to 232°C)
Typical dropping point: 525°F+ (273°C)
Repels water and resists washout and spray-off
Meets NLGI GC-LB criteria for automotive wheel bearing and chassis lubrication
Lithium EP Plus LP-10™ Grease
Lithium EP Plus LP-10™ is an NLGI Grade 2 multipurpose lithium grease formulated for reliable lubrication under normal operating conditions and demanding loads. LP-10 reduces friction and wear while providing extreme-pressure protection. Enhanced with Muscle Metal Treatment MT-10®, LP-10 promotes protective boundary film formation to reduce metal-to-metal contact.
Extreme-pressure and antiwear protection
Reduces friction-related heat and wear
Improves equipment reliability
Continuous operating range: 0°F to 275°F (-17°C to 135°C)
Typical dropping point: 375°F+ (190°C)
Multipurpose versatility
Extreme-Lift EL-10™ Grease
Extreme-Lift EL-10™ is an NLGI Grade 2 extreme-pressure (EP) grease formulated with a calcium sulfonate complex thickener. Designed for demanding equipment applications, it provides outstanding load-carrying performance, exceptional resistance to water washout, and corrosion protection.
Extreme-pressure and antiwear protection
Repels water and resists washout and spray-off
Protects against rust and corrosion
Provides thermal stability, with a dropping point above 500°F (260°C)
Improves equipment reliability
Provides long-lasting lubrication
Penetrating Oil SL-10™
Penetrating Oil SL-10™ is a penetrating oil and heavy-duty spray lubricant that contains Muscle Metal Treatment MT-10® technology and Power-Lift Grease PL-10™ lubrication. SL-10 quickly penetrates into hard-to-reach areas to loosen seized and corroded nuts, bolts and other metal mechanisms. SL-10 also provides long-lasting protection from rust and corrosion.
Fast-acting penetrating oil
Loosens seized & corroded metal mechanisms
Protects against rust & corrosion
Heavy-duty lubricating action
Extreme Conditions SL-10™
Extreme Conditions SL-10™ is a heavy-duty lubricant formulated for applications where corrosion prevention is the main concern. It protects exposed metal surfaces from rust and corrosion while displacing water and providing long-lasting lubrication and penetrating action.
Enhanced rust and corrosion protection
Exceptional salt spray protection from a thin-film rust preventive on ferrous metal surfaces
Rapid water displacement
Heavy-duty lubrication
Penetrates into hard-to-reach areas to loosen rusted, seized, and corroded parts
Moist-Out MO-10™
Moist-Out MO-10™ is a moisture-displacing lubricant formulated to penetrate hard-to-reach areas, remove moisture from metal surfaces, lightly lubricate for reduced friction and wear, and help protect from rust and corrosion.
Displaces moisture quickly
Provides light, long-lasting lubrication
Protects against rust and corrosion
Creeps into tight spaces
Diesel High Performance DHP-10™
Diesel High Performance DHP-10™ is a concentrated diesel fuel additive formulated to improve lubricity, increase cetane, maintain injector cleanliness, and protect fuel pumps and injectors from wear.
Improves diesel fuel lubricity
Cleans injectors and helps control deposits
Protect pumps and injectors from wear
Increases cetane for improved combustion performance
Suitable for use in both common-rail and conventional diesel fuel systems
Fuel Treatment FT-10™
Fuel Treatment FT-10™ is a multipurpose gasoline, diesel and fuel-oil additive designed for ongoing fuel-system maintenance. It cleans fuel-system components, disperses moisture, provides added lubricity and helps control deposits. FT-10 also provides benefits for fuel oil furnaces, boilers and bulk fuel-storage applications.
Cleans & protects fuel systems
Disperses moisture
Adds lubricity
Helps control gum, varnish, and deposits
Supports cold-weather diesel operation
Improves fuel efficiency by keeping the fuel system cleaner
Power Cutting Oil PC-10™
Power Cutting Oil PC-10™ is used in a wide range of cutting and drilling applications and is specifically designed for dual functionality: Use full-strength or as a supplemental additive to the existing insoluble oil. PC-10™ contains Muscle Metal Treatment MT-10® technology, along with ionic bonding and lubricity enhancement agents. This results in reduced surface temperatures and extended tool life. PC-10™ is not water soluble. If your operation requires a water-soluble fluid, try Muscle Soluble Cutting Oil SC-10™.
Extends tool life
Increases cutting speeds & production rates
More metal extraction per cut
Provides outstanding surface finishes
Excellent extreme-pressure properties
Soluble Cutting Oil SC-10™
Soluble Cutting Oil SC-10™ is a fully formulated, water soluble cutting fluid that is used in a wide range of metalworking applications. SC-10™ works on an advanced achievement application of multiple metalworking technologies that induce ionic bonding agents and metal film strength reducers. SC-10™ contains Muscle Metal Treatment MT-10® technology for lubricity enhancement and friction-reducing properties. If your operation requires a full-strength insoluble cutting oil or additive, try Muscle Power Cutting Oil PC-10™.
Extends tool life over conventional oils
Provides smoother finishes
Enhances cutting ability
Protects parts & equipment from rust
Excellent cooling properties
Air Tool Oil AT-10™
Air Tool Oil AT-10™ lubricates, cleans and protects piston and rotary type air tools. AT-10™ removes gummy deposits, stops rust, and repels air line moisture and water spray. AT-10™ will give your air tool more power and speed, smoother operation, and improved reliability. Contains Muscle Metal Treatment MT-10® technology.
Lubricates, cleans & protects
Stops & inhibits rust
Extends tool life
Repels air line moisture
Industrial user or commercial buyer?