Agriculture
Industrial user or commercial buyer?
Metal Treatment MT-10®
Metal Treatment MT-10® is an anti-friction lubricant additive used with the existing lubricant in engines, transmissions, gears, bearings, pumps, motors, and other mechanical equipment. MT-10® improves metal-surface lubricity and promotes protective boundary-film formation to reduce friction-related heat and wear.
Reduces friction-related heat and wear
Improves lubricity and load-carrying capacity
Lowers operating temperatures
Improves equipment operating efficiency
Hydraulic Treatment HT-10™
Hydraulic oil additive formulated to reduce friction-related heat and wear, improve metal-surface lubricity, and support reliable hydraulic system operation. Its lower viscosity makes Hydraulic Treatment HT-10™ especially well suited for systems with fine micron filtration or sensitive filter monitoring.
Reduces friction-related heat and wear
Reduces varnish-related sticking and deposits
Supports smoother hydraulic system operation with less noise
Extends equipment service life and reduces valve replacement
Lowers system operating temperatures
Reduces energy costs
Power-Lift Grease PL-10™
Power-Lift Grease PL-10™ is a lithium complex, anti-wear, extreme-pressure (EP) grease formulated to reduce friction and wear in demanding applications. Fortified with Muscle Metal Treatment MT-10®, PL-10 combines excellent grease retention, thermal stability, and load-carrying performance with enhanced boundary lubrication protection.
Extreme-pressure and anti-wear protection
Protects against rust and corrosion
Improves equipment reliability
Continuous operating temperature range: 0°F to 450°F (-17°C to 232°C)
Typical dropping point: 525°F+ (273°C)
Repels water and resists washout and spray-off
Meets NLGI GC-LB criteria for automotive wheel bearing and chassis lubrication
Lithium EP Plus LP-10™ Grease
Lithium EP Plus LP-10™ is an NLGI Grade 2 multipurpose lithium grease formulated for reliable lubrication under normal operating conditions and demanding loads. LP-10 reduces friction and wear while providing extreme-pressure protection. Enhanced with Muscle Metal Treatment MT-10®, LP-10 promotes protective boundary film formation to reduce metal-to-metal contact.
Extreme-pressure and antiwear protection
Reduces friction-related heat and wear
Improves equipment reliability
Continuous operating range: 0°F to 275°F (-17°C to 135°C)
Typical dropping point: 375°F+ (190°C)
Multipurpose versatility
Extreme-Lift EL-10™ Grease
Extreme-Lift EL-10™ is an NLGI Grade 2 extreme-pressure (EP) grease formulated with a calcium sulfonate complex thickener. Designed for demanding equipment applications, it provides outstanding load-carrying performance, exceptional resistance to water washout, and corrosion protection.
Extreme-pressure and antiwear protection
Repels water and resists washout and spray-off
Protects against rust and corrosion
Provides thermal stability, with a dropping point above 500°F (260°C)
Improves equipment reliability
Provides long-lasting lubrication
Penetrating Oil SL-10™
Penetrating Oil SL-10™ is a penetrating oil and heavy-duty spray lubricant that contains Muscle Metal Treatment MT-10® technology and Power-Lift Grease PL-10™ lubrication. SL-10™ quickly penetrates into hard-to-reach areas to loosen seized and corroded nuts, bolts and other metal mechanisms. SL-10™ also provides long-lasting protection from rust and corrosion.
Fast-acting penetrating oil
Loosens seized & corroded metal mechanisms
Protects against rust & corrosion
Heavy-duty lubricating action
Extreme Conditions SL-10™
Extreme Conditions SL-10™ is a heavy-duty lubricant formulated for applications where corrosion prevention is the main concern. It protects exposed metal surfaces from rust and corrosion while displacing water and providing long-lasting lubrication and penetrating action.
Enhanced rust and corrosion protection
Exceptional salt spray protection from a thin-film rust preventive on ferrous metal surfaces
Rapid water displacement
Heavy-duty lubrication
Penetrates into hard-to-reach areas to loosen rusted, seized, and corroded parts
Diesel High Performance DHP-10™
Diesel High Performance DHP-10™ is a concentrated diesel fuel additive formulated to improve lubricity, increase cetane, maintain injector cleanliness, and protect fuel pumps and injectors from wear.
Improves diesel fuel lubricity
Cleans injectors and helps control deposits
Protect pumps and injectors from wear
Increases cetane for improved combustion performance
Suitable for use in both common-rail and conventional diesel fuel systems
Fuel Treatment FT-10™
Fuel Treatment FT-10™ is a multipurpose gasoline, diesel and fuel-oil additive designed for ongoing fuel-system maintenance. It cleans fuel-system components, disperses moisture, provides added lubricity and helps control deposits. FT-10 also provides benefits for fuel oil furnaces, boilers and bulk fuel-storage applications.
Cleans & protects fuel systems
Disperses moisture
Adds lubricity
Helps control gum, varnish, and deposits
Supports cold-weather diesel operation
Improves fuel efficiency by keeping the fuel system cleaner
LumberJack LJ-10™
LumberJack LJ-10™ is designed just for the logging industry. LJ-10™ lubricates the chain links to reduce friction-related heat and wear. Cutting performance is optimized due to reduced friction. LJ-10™’s tackiness reduces high-speed oil throw-off. LJ-10™ contains Muscle Metal Treatment MT-10® technology for improved boundary lubrication.
Lubricates & protects moving metal surfaces
Reduces friction-related heat & wear
Reduces chain saw binding
Extends life of chain saw bar
Protects against extreme pressure
Effective in both cold and hot weather conditions (use year-round)
Industrial user or commercial buyer?