Railroad & Transportation
Wheel Mounting Compound WM-10™
Wheel Mounting Compound WM-10™ is an extreme-pressure liquid compound formulated specifically for press fitting steel railroad wheels onto axles. It provides consistent lubrication at the wheel-bore and axle-wheel-seat interface to reduce chatter, alignment problems, and friction-related surface damage during mounting. WM-10 is listed as an approved wheel mounting compound in the AAR Manual of Standards and Recommended Practices, Section G, Part II-Wheel and Axle Shop Manual.
Improves wheel-to-axle press fitting
Reduces chatter & noise during mounting
Reduces alignment problems
Provides visible application coverage
Protects metal surfaces from wear under high contact pressures & low speeds
Limits binding and seizure during mounting
Traction Motor Gear Case Additive TM-10™
Traction Motor TM-10™ is maximum-duty, metal-conditioning lubricant for adding to traction motor gear cases that need extra protection from extreme pressure. TM-10 increases gear service life while cooling the overall system. TM-10 polishes, seals and protects the gear metal from wear and damage caused by extreme pressure and friction-related heat.
Protects gears from wear & damage
Reduces operating temperatures
Protects from friction, heat & wear
Protects against premature gear failure
Metal Treatment MT-10®
Metal Treatment MT-10® is an anti-friction lubricant additive used with the existing lubricant in engines, transmissions, gears, bearings, pumps, motors, and other mechanical equipment. MT-10® improves metal-surface lubricity and promotes protective boundary-film formation to reduce friction-related heat and wear.
Reduces friction-related heat and wear
Improves lubricity and load-carrying capacity
Lowers operating temperatures
Improves equipment operating efficiency
Hydraulic Treatment HT-10™
Hydraulic oil additive formulated to reduce friction-related heat and wear, improve metal-surface lubricity, and support reliable hydraulic system operation. Its lower viscosity makes Hydraulic Treatment HT-10™ especially well suited for systems with fine micron filtration or sensitive filter monitoring.
Reduces friction, heat and wear
Reduces varnish-related sticking and deposits
Supports smoother hydraulic system operation with less noise
Extends equipment service life and reduces valve replacement
Lowers system operating temperatures
Reduces energy costs
Power-Lift Grease PL-10™
Power-Lift Grease PL-10™ is a lithium complex, anti-wear, extreme-pressure (EP) grease formulated to reduce friction and wear in demanding applications. Fortified with Muscle Metal Treatment MT-10®, PL-10 combines excellent grease retention, thermal stability, and load-carrying performance with enhanced boundary lubrication protection.
Extreme-pressure and anti-wear protection
Protects against rust and corrosion
Improves equipment reliability
Continuous operating temperature range: 0°F to 450°F (-17°C to 232°C)
Typical dropping point: 525°F+ (273°C)
Repels water and resists washout and spray-off
Meets NLGI GC-LB criteria for automotive wheel bearing and chassis lubrication
Penetrating Oil SL-10™
Penetrating Oil SL-10™ is a penetrating oil and heavy-duty spray lubricant that contains Muscle Metal Treatment MT-10® technology and Power-Lift Grease PL-10™ lubrication. SL-10 quickly penetrates into hard-to-reach areas to loosen seized and corroded nuts, bolts and other metal mechanisms. SL-10 also provides long-lasting protection from rust and corrosion.
Fast-acting penetrating oil
Loosens seized & corroded metal mechanisms
Protects against rust & corrosion
Heavy-duty lubricating action
Diesel High Performance DHP-10™
Diesel High Performance DHP-10™ is a concentrated diesel fuel additive formulated to improve lubricity, increase cetane, maintain injector cleanliness, and protect fuel pumps and injectors from wear.
Improves diesel fuel lubricity
Cleans injectors and helps control deposits
Protect pumps and injectors from wear
Increases cetane for improved combustion performance
Suitable for use in both common-rail and conventional diesel fuel systems
Fuel Treatment FT-10™
Fuel Treatment FT-10™ is a multipurpose gasoline, diesel and fuel-oil additive designed for ongoing fuel-system maintenance. It cleans fuel-system components, disperses moisture, provides added lubricity and helps control deposits. FT-10 also provides benefits for fuel oil furnaces, boilers and bulk fuel-storage applications.
Cleans & protects fuel systems
Disperses moisture
Adds lubricity
Helps control gum, varnish, and deposits
Supports cold-weather diesel operation
Improves fuel efficiency by keeping the fuel system cleaner
Air Tool Oil AT-10™
Air Tool Oil AT-10™ lubricates, cleans and protects piston and rotary type air tools. AT-10 removes gummy deposits, stops rust, and repels air line moisture and water spray. AT-10 will give your air tool more power and speed, smoother operation, and improved reliability. Contains Muscle Metal Treatment MT-10® technology.
Lubricates, cleans & protects
Stops & inhibits rust
Extends tool life
Repels air line moisture